Which Way Should an Ab Mat Face? A Guide to the PG Standard Ab Mat
November 12, 2026
For the POWER GUIDANCE Standard contoured Ab Mat, start with the flat base down and the curved surface up. In PG’s recommended setup illustration, the steeper end is toward the hips and the gentler, tapering end is toward the shoulders. Position the raised curve beneath your lower back—not beneath your head or directly under your tailbone.
This model also allows the mat to be turned end-for-end to change the support angle. That means there is a recommended starting orientation, but not one compulsory direction for every person. This guide applies to the PG Standard contoured Ab Mat; do not assume the same setup for a folding, wider, or differently shaped model.
Identify the two ends before you lie down
Place the mat on its flat base and look at it from the side. One end rises more steeply toward the raised curve; the opposite end has a longer, gentler taper. These descriptions are more useful than “the front” or “the back,” which can change depending on where you are standing.
Towards hips:the steeper end in the recommended starting setup.
Towards shoulders:the gentler, tapering end.
Under the lower back:the raised part of the curve.
Think of the mat as sitting beneath the space between your hips and shoulders. Both ends are near your back, so “put the taller end toward your back” does not clearly identify the intended direction.
Set up the mat in four steps
Choose a clean, level floor.Put the flat base on the floor with the curved surface facing upward. Make sure the mat is not rocking or resting on an uneven object.
Start with the illustrated orientation.Face the steeper end toward your hips and the gentler end toward your shoulders.
Check where the curve meets your body.Lower yourself into position slowly. The raised curve should meet the hollow of your lower back. If it sits under your pelvis or too far toward your upper back, sit up and reposition the mat before continuing.
Check comfort before continuing.Use controlled movements within a comfortable range. Do not force yourself farther backward to match a photograph. Stop if you feel pain or uncomfortable pressure rather than repeatedly trying to push through it.
Can you turn the mat the other way?
Yes. The PG Standard product guidance allows an end-for-end adjustment to find a comfortable lower-back support position. Turn it around on the floor while keeping theflat base down and curved surface up; do not flip it upside down.
Reversing the mat changes which slope faces your hips and which faces your shoulders. It does not make the mat a different size, and it is not a promise of greater abdominal activation or relief from pain. Begin with the recommended illustration, then reassess contact and comfort if you try the reverse orientation.
If neither position feels suitable, stop using that setup. Check that you have the Standard model and that the curve is actually beneath your lower back. Persistent discomfort is not something to solve simply by forcing a different angle.
Frequently asked questions
Should the taller end point toward my back?
“Toward my back” is ambiguous. For the recommended PG Standard starting position, use your hips and shoulders as reference points: steeper end toward the hips, gentler taper toward the shoulders, with the curve supporting the lower-back area.
Does “both sides” mean I should use the mat upside down?
No. Here it refers to reversing the mat end-for-end to change the support angle. The flat base remains underneath and the curved side stays against the lower-back area.